Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Willkommen - Welcome

Custom-made

Custom-made products on request

On request, we can manufacture finish ground rods made to your specifications, as well as :

  • Rods with custom-dimensioned bolt hole circles and hole
  • Rods with helix angles from 10° to 60°
  • Fixed-length rods, up to 415 mm
  • Solid rods with diameters up to 52 mm
  • Square rods and rectangular rods

Rods with chamfer on one end

Rods with more than 3 coolant ducts

Rods with center holes, as specifies in DIN 332 Type R / Type A

Rods with 1-in-2 (Y) exit ducts - flat face style

Rods with 1-in-2 (Y) exit ducts - 210° tip style

Rods with 2 helical coolant ducts, fem, coolant feed center

Our Program

Application examples

View the embedded image gallery online at:
http://nt-systemloesungen.de/index.php/en/2-non-categorise?start=30#sigProIdecdac3ef65

Carbide Grades

Carbide Grades

Grade GC-K20F

Fine-grain carbide grade with a grain size of 0.7 µm for rotational solid-carbide tools. Covers a wide range of K-grade applications. Standard carbide for machining gray cast iron, white cast iron, hardened steel, heat-treatable aluminium alloys, plastics containing fillers, glass-fiber reinforced plastics, brake shoe lining, etc.

Grade GC-K40UF

Our most universal carbide grade for an exceptionally wide range of applications K40UF is made of ultrafine tungsten carbide with a grain size of 0.7 µm. In combination with a cobalt content of 10 %, this allows for both superior hardness and toughness to be attained. The ultrafine grain carbide grade K40UF is particularly suitable for milling and, on account of its cutting-edge stability, has become our standard grade for high-performance drilling. Well-suited for drilling or milling applications with high-temperature alloys, stainless steels, gray cast iron, titanium alloys, and glass-fiber reinforced plastics.

Grade GC-K44UF

This grade offers a cobalt content of 12 % and a grain size of 0.5 µm, ensuring extremely high toughness while at the same time maintaining substantial hardness. Next to drilling and tapping, this grade lends itself well to milling applications with titanium alloys, high-temperature alloys, gray cast iron, stainless and hardened steels, glass-fiber reinforced plastics, and composite materials.

Grade GC-K55SF

Our newly-developed premium carbide grade for high-performance applications has set the benchmark for carbides. K55SF is made of superfine tungsten carbide with grain sizes between 0.2 and 0.5 µm, significantly surpassing the hardness of our previous grades. This super-fine grain carbide grade features high cutting-edge stability while maintaining high wear resistance and considerable toughness. The application scope spans the usage with highly wear-resistant materials, such as stainless and hardened steels, graphite, high-strength aluminium alloys, as well as abrasively acting composite materials, e.g. Kevlar® and GFRP. Taking advantage of this material’s full potential and superior performance means using it in demanding applications which require feed rates or cutting speeds that are significantly higher than those supported by conventional carbide materials.

Grade GC-K6UF

Our new carbide grade for reaming applications. Offering a relatively low cobalt content of 6 %, this grade has been developed specifically with reaming applications in mind that demand both superior hardness and resistance to wear. K6UF is also well-suited for drilling applications with composite materials and for deep-hole drilling.

  Grade
GC-K20F
GC-K40UF
GC-K44UF
GC-K55SF
GC-K6UF
  ISO classification
K10
K40-K50
K40-K50
K10-K30
K05
  CO [%]
8.0
10.0
12.0
9.0
6.0
  WC+Cr3C2+VC [%]
92.0
90.0
88.0
91.0
94.0
  TiC/Ta/Nbc [%]
0
0
0
0
0
  Density [g/cm3]
14.6
14.5
14.05
14.4
14.95
  HV30 [kg/mm2]
1710
1610
1680
1920
1900
  HRA [ISO3738]
92.8
92.3
92.5
93.9
93.8
  KIC [MNm-3/2]
9.0
10.5
10.0
9.3
9.3
  Bending strength [N/mm2]
3200
>4000
>4000
>4000
>4000
 
 A
≤02
≤02
≤02
≤02
≤02
  Porosity
 B
00
00
00
00
00
 
 C
00
00
00
00
00
  WC grain size [µm]
0.7
0.6
0.5
0.2-0.5
0.6
 
 

Microstructure GC-K40UF

Microstructure GC-K44UF

 

Microstructure GC-K55SF

Microstructure GC-K6UF

PTA torch systems

 

Torch systems

NT Systemlösungen GmbH furnishes the complete range of welding torches required in the field of PTA welding. Available standard products include PTA welding torches, from microplasma welding systems all the way to heavy-duty welding torches. Torch systems of this kind are characterised by the following properties:

  • Robust design and high durability of the individual components
  • Efficient water cooling
  • Excellent sealing system

 

Hand-held plasma-powder welding torches

  • PT 100
  • PT 150

 

Plasma-powder machine-welding torches

  • PT 100
  • PT 150
  • PT 202
  • PT 300
  • PT 600

 

Internal plasma-powder welding torches

  • PT 100i
  • PT 120i
  • PT 200i

 

View the embedded image gallery online at:
http://nt-systemloesungen.de/index.php/en/2-non-categorise?start=30#sigProId8cf86cd6a5